| Páginas sobre el tema: [1 2] > | SDL Trados 2007: Mismatch between source and TagEditor document Autor de la hebra: Milada Šejnohová
|
|---|
Dear all,
can you please give me a solution to the problem: "Mismatch between source and TagEditor document detected. Unable to create target document." ?
When saving the target text (large PowerPoint presentation, 56 pages) I get this message.
Thank you in advance for your precious help.
Best wishes,
Milada
| | | | Jaroslaw Michalak 
Polonia
Local time: 03:27
Miembro 2004
inglés al polaco
LOCALIZADOR DEL SITIO | Workaround... | May 23, 2007 |
It's more of a workaround than a solution, but there is a chance it will work smoothly...
Copy the ttx somewhere else, then open the source file again. Translate (preferably translate to fuzzy) it with the TM you have created. Then it should be possible to save as target...
[Zmieniono 2007-05-23 19:36]
| | | | | Trados is telling that the TTX is not from the PPT you have | May 23, 2007 |
Hello
That message, if not due to another Trados bug, is telling that the TTX file you worked on was created from a different PPT than the one you have in the folder where the TTX is. If you actually did the conversion PPT-TTX, plz disregard what I'll say next.
To check if Trados is right, remove that "mismatched TTX" from the working folder and open the original PPT again in TagEditor. That will create a TTX that HAS to be correct. Retranslate that original TTX, fuzzy... See more Hello
That message, if not due to another Trados bug, is telling that the TTX file you worked on was created from a different PPT than the one you have in the folder where the TTX is. If you actually did the conversion PPT-TTX, plz disregard what I'll say next.
To check if Trados is right, remove that "mismatched TTX" from the working folder and open the original PPT again in TagEditor. That will create a TTX that HAS to be correct. Retranslate that original TTX, fuzzy or "one TU at a time". I'd prefer to retranslate manually to see if are there any discrepant TUs. Save and run the clean-up.
If Trados shows the same message, it's probably a bug. I wouldn't bother to argue with Trados 2007, I'd translate it in Trados 2006. I'd export the memory used in the format "Translator's Workbench (2.x-6.x)*.txt", then install Trados 2006, import those segments, and translate the PPT in TagEditor 2006.
Hope it is not a bug.
Cheers, Edric
[Edited at 2007-05-23 21:22] ▲ Collapse
| | | | RWSTranslati (X)
Alemania
Local time: 03:27
alemán al inglés
+ ...
Hello,
maybe the TTX was created on SDL Trados 2006. Then yopu have the problem that SDL Trados 2007 comes with a new Powerpoint filter.
Try to save the ttx back on a pc with SDL Trados 2006.
MfG
Hans
| | |
|
|
|
Milada Šejnohová
República Checa
Local time: 03:27
inglés al checo
+ ...
PERSONA QUE INICIÓ LA HEBRA | Thank you all | Jun 9, 2007 |
Hallo,
thank you all for your effort. However so far I have not found a solution, neither got an answer from SDL staff.
Greetings to you,
Milada
| | | | TTilch
Local time: 03:27
inglés al alemán
+ ...
Hello,
Has anyone of you already found a solution for this problem? We have the same issue and need to find a solution within the next 24 h.
We have tried numerous solutions, none of which worked:
- placing the original PPT file in the same folder as the translated TTX file (this is what the Trados support page suggests)
- retranslating the PPT file so that a new TTX file is created
- saving the PPT file under a new name in case that it was crea... See more Hello,
Has anyone of you already found a solution for this problem? We have the same issue and need to find a solution within the next 24 h.
We have tried numerous solutions, none of which worked:
- placing the original PPT file in the same folder as the translated TTX file (this is what the Trados support page suggests)
- retranslating the PPT file so that a new TTX file is created
- saving the PPT file under a new name in case that it was created with another PowerPoint version than ours
- avoiding splitting/merging sentences
Any further ideas/solutions that worked for you?
Best regards,
Tanja ▲ Collapse
| | | | Strastran (X)
Francia
Local time: 03:27
francés al inglés
+ ...
| Any solutions? | Jan 7, 2008 |
Has anyone found a solution to this problem?
I have a translation to send back tomorrow but cannot do anything about this error.
I can't really see how I can install Trados 2006.
Thanks in advance!
Edit: I have solved the problem by removing a Slide which contained troublesome text boxes. It seems that this Slide was creating the error.
I deleted the slide, reprocessed the file using TagEditor, saved as target (which... See more Has anyone found a solution to this problem?
I have a translation to send back tomorrow but cannot do anything about this error.
I can't really see how I can install Trados 2006.
Thanks in advance!
Edit: I have solved the problem by removing a Slide which contained troublesome text boxes. It seems that this Slide was creating the error.
I deleted the slide, reprocessed the file using TagEditor, saved as target (which worked) and re-inserted the problematic slide into the file, translating it manually.
[Edited at 2008-01-07 15:13] ▲ Collapse
| | | | Uta Moncur
Estados Unidos
Local time: 20:27
inglés al alemán
+ ...
| Problem solved | Mar 19, 2008 |
I had the same problem this morning after upgrading to SP2 (build 835). I had cleaned the same file yesterday (with Trados 2007 SP1), so I knew it couldn't be the TTX file or the location of the PPT file. In desperation, I tried to retranslate the PPT in TagEditor and came upon untranslated segment. I realized this was a note, which had previously been excluded from the translation process. The simple solution was to go back into the Filter Settings (via Start - Programs - SDL Trados - Trados - ... See more I had the same problem this morning after upgrading to SP2 (build 835). I had cleaned the same file yesterday (with Trados 2007 SP1), so I knew it couldn't be the TTX file or the location of the PPT file. In desperation, I tried to retranslate the PPT in TagEditor and came upon untranslated segment. I realized this was a note, which had previously been excluded from the translation process. The simple solution was to go back into the Filter Settings (via Start - Programs - SDL Trados - Trados - Filters) and select to exclude notes under the Powerpoint settings. I suppose when I upgraded to SP2, the filter settings had been reset to default values. I hope this will help someone in the future! ▲ Collapse
| | |
|
|
|
| Any solution | Aug 11, 2008 |
Milada_S wrote:
Dear all,
can you please give me a solution to the problem: "Mismatch between source and TagEditor document detected. Unable to create target document." ?
When saving the target text (large PowerPoint presentation, 56 pages) I get this message.
Thank you in advance for your precious help.
Best wishes,
Milada
Hello Milada_S,
Did you get any solution? I have the same issue.
Thank you
| | | | Vito Smolej
Alemania
Local time: 03:27
Miembro 2004
inglés al esloveno
+ ...
LOCALIZADOR DEL SITIO | why not start with the original PPT... | Aug 11, 2008 |
and pretranslate it? That is, create a fresh ttx from the contents of your TM?
Note that your translation is not only hidden somewhere in that broken TTX. You have it - hopefully intact - also in the translation memory you have been using.
regards
Vito
| | | | | It did not work | Aug 11, 2008 |
Vito Smolej wrote:
and pretranslate it? That is, create a fresh ttx from the contents of your TM?
Note that your translation is not only hidden somewhere in that broken TTX. You have it - hopefully intact - also in the translation memory you have been using.
regards
Vito
I tried this option but It did not work.
Thank you
Ahmad
| | | | | It did not work | Aug 11, 2008 |
Uta Moncur wrote:
I had the same problem this morning after upgrading to SP2 (build 835). I had cleaned the same file yesterday (with Trados 2007 SP1), so I knew it couldn't be the TTX file or the location of the PPT file. In desperation, I tried to retranslate the PPT in TagEditor and came upon untranslated segment. I realized this was a note, which had previously been excluded from the translation process. The simple solution was to go back into the Filter Settings (via Start - Programs - SDL Trados - Trados - Filters) and select to exclude notes under the Powerpoint settings. I suppose when I upgraded to SP2, the filter settings had been reset to default values. I hope this will help someone in the future!
I tried this too but it did not work.
Regards
| | |
|
|
|
David Rigert (X)
Local time: 10:27
japonés al inglés
| Solution found | Sep 11, 2008 |
One of our Chinese translators was having the same problem. I narrowed it down to three slides that were causing it and figured out what it was. All three slides had symbols from the Wingding font. When I deleted these symbols, I was able to clean up the file without any problems. This definately looks like a bug to me.
| | | | | How to find the problemstic slide/text? | Oct 17, 2008 |
I have the same problem, and I do not know how I can find what the problem is in a 115 slides' file.
Could anyone please advise?
| | | | Jacques DP
Suiza
Local time: 03:27
inglés al francés
| It was a euro symbol in my case | Nov 13, 2008 |
I just had the exact same problem.
In my case, it was a euro (€) symbol which made clean-up impossible, producing the same generic and inappropriate error message.
After I read this thread (and especially David's post), it was one of my first guesses, fortunately.
| | | | | Páginas sobre el tema: [1 2] > | To report site rules violations or get help, contact a site moderator: You can also contact site staff by submitting a support request » SDL Trados 2007: Mismatch between source and TagEditor document | Trados Studio 2022 Freelance | The leading translation software used by over 270,000 translators.
Designed with your feedback in mind, Trados Studio 2022 delivers an unrivalled, powerful desktop
and cloud solution, empowering you to work in the most efficient and cost-effective way.
More info » |
| | CafeTran Espresso | You've never met a CAT tool this clever!
Translate faster & easier, using a sophisticated CAT tool built by a translator / developer.
Accept jobs from clients who use Trados, MemoQ, Wordfast & major CAT tools.
Download and start using CafeTran Espresso -- for free
Buy now! » |
|
| | | | X Sign in to your ProZ.com account... | | | | | |
Login to reply/comment 
Translation news related to SDL Trados
