| Páginas sobre el tema: [1 2] > | How to install plugin Okapi in OmegaT Autor de la hebra: Meyers (X)
|
|---|
Meyers (X)
Local time: 21:34
inglés al neerlandés
Hello,
I've downloaded the Okapi plugin.
I put it in the folder \program files 86 \ omegaT \ plugins \
What exactly needs to be placed in the plugin folder?
- the whole zip file
- the Okapi file inside the zip
- only the jar files themselves
I have tried all options, and reopened OmegaT, but it doesn't seem to work.
Anyone can assist?
Thank you.
| | | | Susan Welsh 
Estados Unidos
Local time: 15:34
ruso al inglés
+ ...
| The whole Okapi file | Apr 16, 2015 |
As far as I know -- that's what's in mine. Of course you have to extract it from the zip file.
| | | | esperantisto
Local time: 23:34
Miembro 2006
inglés al ruso
+ ...
LOCALIZADOR DEL SITIO | Why do you think… | Apr 16, 2015 |
… that it does not work? What do you expect?
| | | | Meyers (X)
Local time: 21:34
inglés al neerlandés
PERSONA QUE INICIÓ LA HEBRA | "Filter" doesn't appear in the menu | Apr 17, 2015 |
Susan, thanks.
I extracted the whole Okapi file from the zip file and put it in the folder
\program files 86 \ omegaT \ plugins \
esperantisto wrote:
… that it does not work? What do you expect?
According to the instructions, "Filter" should appear in the menu
and it doesn't.
| | |
|
|
|
| | Didier Briel
Francia
Local time: 21:34
inglés al francés
+ ...
| Filters should appear in Options > File Filters | Apr 18, 2015 |
Meyers wrote:
esperantisto wrote:
… that it does not work? What do you expect?
According to the instructions, "Filter" should appear in the menu
and it doesn't.
Not according to the instructions here:
http://www.opentag.com/okapi/wiki/index.php?title=Okapi_Filters_Plugin_for_OmegaT
The instructions delivered with the plugin say:
"The next time you run OmegaT the new filters will be available."
Okapi filters should appear in Options > File Filters.
Didier
| | | | Meyers (X)
Local time: 21:34
inglés al neerlandés
PERSONA QUE INICIÓ LA HEBRA | sdlxliff not in the list | Apr 20, 2015 |
Thank you Didier.
I found the File Filters under Options.
However, I don't see Sdlxliff in the list.
I added a Sdlxliff file to a new project but it's not recognized.
Thanks for your help.
| | | | Didier Briel
Francia
Local time: 21:34
inglés al francés
+ ...
| Sdlxliff is not the name of a filter | Apr 21, 2015 |
Meyers wrote:
I found the File Filters under Options.
However, I don't see Sdlxliff in the list.
I added a Sdlxliff file to a new project but it's not recognized.
If the Okapi plugin is correctly installed, you should see "XLIFF file (Okapi)" in the list of filters.
Note also that the Okapi filter must be checked, and that the OmegaT native XLIFF filter ("XLIFF") must be unchecked.
Didier
| | |
|
|
|
Meyers (X)
Local time: 21:34
inglés al neerlandés
PERSONA QUE INICIÓ LA HEBRA | Thanks Didier | Apr 21, 2015 |
It's working now
Thanks!
| | | | Magda P.
Italia
Local time: 21:34
italiano al griego
+ ...
| Okapi file downloaded, new filter checked, native one unchecked, but still can't open OmegaT project | Sep 18, 2018 |
Hi everyone,
I wonder if you can help me.
I have downloaded the okapi plugin and installed it correctly: the XLIFF Okapi filter appeared in the list of filters and I checked it and unchecked the OmegaT native xliff filter.
However, I'm still having a problem.
Once I re-open the project in OmegaT (with a xliff file in the source folder), I get an error that seems to refer to Java.
I have the 1.8 Java version which should be okay since the minimum requir... See more Hi everyone,
I wonder if you can help me.
I have downloaded the okapi plugin and installed it correctly: the XLIFF Okapi filter appeared in the list of filters and I checked it and unchecked the OmegaT native xliff filter.
However, I'm still having a problem.
Once I re-open the project in OmegaT (with a xliff file in the source folder), I get an error that seems to refer to Java.
I have the 1.8 Java version which should be okay since the minimum requirement is 1.7.
Any suggestions?
I'd be really grateful!
Thank you. ▲ Collapse
| | | | Didier Briel
Francia
Local time: 21:34
inglés al francés
+ ...
| Use OmegaT 4 | Sep 18, 2018 |
Magda Phili wrote:
I have downloaded the okapi plugin and installed it correctly: the XLIFF Okapi filter appeared in the list of filters and I checked it and unchecked the OmegaT native xliff filter.
However, I'm still having a problem.
Once I re-open the project in OmegaT (with a xliff file in the source folder), I get an error that seems to refer to Java.
I have the 1.8 Java version which should be okay since the minimum requirement is 1.7.
Any suggestions?
There is an incompatibility between OmegaT 3.6 and recent versions of the Okapi plugin. This is perhaps the reason for the message you get.
If that's not already the case, use OmegaT 4.
Didier
| | | | Magda P.
Italia
Local time: 21:34
italiano al griego
+ ...
Thank you so much Didier!
I've downloaded OmegaT 4 and after a few trials and errors I was able to open the xliff files. What a relief that was! At first OmegaT didn't read the files but then I unchecked one of the options about segmenting (I f... See more Thank you so much Didier!
I've downloaded OmegaT 4 and after a few trials and errors I was able to open the xliff files. What a relief that was! At first OmegaT didn't read the files but then I unchecked one of the options about segmenting (I found this article very useful for this: http://www.velior.ru/2015/12/27/translating-studio-files-in-omegat-never-been-easier/) and I also unchecked a second Okapi filter (2 files). That's the only way I was able to make it work.
If only I had known earlier... I've "lost" quite a lot of work because of this. Anyway, better late than never.
Again, thank you.
Magda
[Edited at 2018-09-20 11:08 GMT] ▲ Collapse
| | |
|
|
|
Magda P.
Italia
Local time: 21:34
italiano al griego
+ ...
| OmegaT compatibility with Trados Studio packages (and TM) | Sep 20, 2018 |
One more thing and very important too.
Does OmegaT accept a Trados Studio package or only single xliff files?
Considering a package contains the project's TM, what are the solutions available?
Thank you.
Magda
| | | | Didier Briel
Francia
Local time: 21:34
inglés al francés
+ ...
| You can use a tool to unpack Trados packages | Sep 20, 2018 |
Magda Phili wrote:
One more thing and very important too.
Does OmegaT accept a Trados Studio package or only single xliff files?
OmegaT only accepts XLIFF files, not packages, but...
Considering a package contains the project's TM, what are the solutions available?
A package is just a zip file. So, simply rename it to .zip, and you can extract the files.
Then, you can use the following tool to convert the TM and the glossary to something you can read with OmegaT:
http://www.vannellen.com/fortranslators.php
Didier
| | | | Magda P.
Italia
Local time: 21:34
italiano al griego
+ ...
| Problem opening xliff files (translated in OmegaT) on Trados | Oct 4, 2018 |
Hi Didier,
Thanks for your help. I was able to convert the memory into .tmx and translated a xliff test file which was then sent to a colleague to check compatibility with Trados. There was an error however in opening the file. Trados couldn't recognise the target language. I double checked the project on OmegaT and it was correct. What could be the problem here?
I need to make sure that clients will read the files.
Also, when translating xliff files on OmegaT are tags to be re... See more Hi Didier,
Thanks for your help. I was able to convert the memory into .tmx and translated a xliff test file which was then sent to a colleague to check compatibility with Trados. There was an error however in opening the file. Trados couldn't recognise the target language. I double checked the project on OmegaT and it was correct. What could be the problem here?
I need to make sure that clients will read the files.
Also, when translating xliff files on OmegaT are tags to be removed or not? I tried both with and without them and we still can't read the translated texts in Trados.
Thanks again. ▲ Collapse
| | | | | Páginas sobre el tema: [1 2] > | Este foro no tiene moderador específicamente asignado. Para denunciar violaciones a las reglas del sitio u obtener ayuda, póngase en contacto con el personal del sitio » How to install plugin Okapi in OmegaT | CafeTran Espresso | You've never met a CAT tool this clever!
Translate faster & easier, using a sophisticated CAT tool built by a translator / developer.
Accept jobs from clients who use Trados, MemoQ, Wordfast & major CAT tools.
Download and start using CafeTran Espresso -- for free
Buy now! » |
| | Protemos translation business management system | Create your account in minutes, and start working! 3-month trial for agencies, and free for freelancers!
The system lets you keep client/vendor database, with contacts and rates, manage projects and assign jobs to vendors, issue invoices, track payments, store and manage project files, generate business reports on turnover profit per client/manager etc.
More info » |
|
| | | | X Sign in to your ProZ.com account... | | | | | |
Login to reply/comment 
