"Treiberendstufe" "driver" "output stage"
About 351 results (0.76 seconds)
https://www.google.de/?gws_rd=ssl#q="Treiberendstufe" "drive...

"Treiberendstufe" "driver" "amplifier"
About 740 results (0.55 seconds)
https://www.google.de/?gws_rd=ssl#q="Treiberendstufe" "drive...

Our extensive family of single-ended input/output, fixed-gain amplifiers can be used from dc to microwave and include gain blocks, low noise amplifiers, intermediate frequency amplifiers, driver amplifiers, and differential amplifiers.
http://www.analog.com/en/products/amplifiers/rf-amplifiers/d...

What is a driver amplifier
In my opinion, a driver amplifier can be simply considered as a driver (to amplify power) that is capable of providing sufficient current (power) to drive the following stage of the circuit.
:
As an exemple for a OPAM (To my mind) this term correspond
either to the
- differentiel entry
- either to the preamplifier just before
the power amplifier double stage.
I think that it looks more like the power stage
usually makes by two HIGH MOSFET input impedance
like a darligton
http://www.edaboard.com/thread27091.html

TriQuint's driver amplifiers are designed to provide linear performance and signal amplification prior to the final power amplifier stages in a transmitter chain
http://www.triquint.com/products/all/amplifiers/driver-ampli...

HIGH POWER DIFFERENTIAL DRIVER AMPLIFIER
The DRV1100 is fixed gain differential line driver designed for very low harmonic distortion at the high powers required of xDSL line interface standards. Operating on a single +5V supply, it can deliver 230mA peak output current and 9.5Vp-p differential output voltage swing
http://www.ti.com/lit/ds/symlink/drv1100.pdf

Single-Ended and Differential ADC Driver Amplifiers
Ideal for High-Frequency, High-Voltage or Low-Power Signal Conditioning
http://www.ti.com/ww/en/analog/ths7700/

ADL5324 RF Driver Amplifier
ADI's ADL5324 .5 Watt RF driver amplifier for wired and wireless applications
Analog Devices ADL5324 incorporates a dynamically adjustable biasing circuit that allows for the customization of OIP3 and P1dB performance from 3.3 V to 5 V, without the need for an external bias resistor. This feature gives the designer the ability to tailor driver amplifier performance to the specific needs of the design. This feature also creates the opportunity for dynamic biasing of the driver amplifier where a variable supply is used to allow for full 5 V biasing under large signal conditions, and then reduced supply voltage when signal levels are smaller and lower power consumption is desirable. This scalability reduces the need to evaluate and inventory multiple driver amplifiers for different output power requirements, from 25 dBm to 29 dBm output power levels.
http://www.digikey.com/en/product-highlight/a/analog-devices...

View ALL IF Amplifiers / ADC Drivers
http://www.linear.com/products/if_amplifiers_|_adc_drivers
IF Amplifiers / ADC Drivers Use the basic tables
http://www.linear.com/parametric/IF_Amplifiers_|_ADC_Drivers

All references are taken from the first page for "driver" "amplifier"
About 21,200,000 results (0.42 seconds)
https://www.google.de/?gws_rd=ssl#q="driver" "amplifier"