zavart térfogat

English translation: error volume, under fault volume

GLOSSARY ENTRY (DERIVED FROM QUESTION BELOW)
Hungarian term or phrase:zavart térfogat
English translation:error volume, under fault volume
Entered by: Katalin Horváth McClure

14:15 Aug 17, 2011
Hungarian to English translations [PRO]
Tech/Engineering - Petroleum Eng/Sci
Hungarian term or phrase: zavart térfogat
A számítómű nem üzemszerű analóg bemenőjele (nyomás -, vagy hőmérséklet távadó áramjel), vagy nem megengedett mértékű eltérése miatt, a számítómű zavart térfogati táraiban összegzett gázmennyiség.
Lingua.Franca
Spain
Local time: 18:11
error volume, under fault volume
Explanation:
A vitafórumban írottakkal együtt úgy gondolom, hogy többféle fordítása lehet, attól függően, hogy azokat a bizonyos feltételeket, amelyek mellett ez a tároló (számláló) működik, hogyan nevezzük.
Ha "fault conditions", akkor "under fault volume" lehet a megoldás, ha "error conditions", akkor pedig "error volume" vagy esetleg "under error volume".

Az alább megadott három anyagban "error volume" a neve.
Az első amerikai:
"Display of currently measured values of flow rate, flow velocity, sound velocity, indication of system status, display of forward and reverse volume counters as well as forward and reverse error volume counters"
http://www.totalflowsupport.com/Manuals-PDF/Totalsonic softw...

A második német gyártó, ha jól látom:
"Reset Error Volume Counter"
http://80.72.135.115/flowsic600/documents/manuals/fr.downloa...

A harmadik ugyanaz a gyártó, de más dokumentum:
"While the system is in “Error” status, the volumes determined are stored in separate error volume counters. These counters can be reset. Such a reset is recorded in the Custody
logbook [1] together with date and time stamp.
#5011 “ForwardVolumeErr“
#5013 “ReverseVolumeErr“ ..."
http://www.automatyka-przemyslowa.pl/flowsic600/documents/ma...

Az "under faulr error" pedig itt található:

http://www.dresser.com/documents/RMI/imcw_user_trmnl_hndbk.p...
Lásd 51. oldal:
"9.1 Clear Occurred Faults
A fault is described as a measurement reading that exceeds its acceptable range. This may be caused, for example, by
exceeding the stated pressure range of the transducer. When a fault condition occurs, an intuitive indication is displayed on the LCD indicating the nature of the fault (see Table 6 (Fault Code Reference Table)).
...
9.2 Clear Uncorrected Volume Under Fault
In all fault conditions, the Uncorrected Under Fault volume register will be activated showing the total number of
accumulated uncorrected volume units during the period in which the fault was present. Only faults that affect the
correction factor will cause the Uncorrected Under Fault register to be activated. Under these conditions, both the
Uncorrected Volume and the Uncorrected Under Fault volume will continue to increment, however the Corrected
Volume register will no longer be activated (this register will be re-activated once the fault condition has been cleared)."
Selected response from:

Katalin Horváth McClure
United States
Local time: 13:11
Grading comment
4 KudoZ points were awarded for this answer



Summary of answers provided
3error volume, under fault volume
Katalin Horváth McClure
2perturbed volume
József Lázár


Discussion entries: 11





  

Answers


14 hrs   confidence: Answerer confidence 2/5Answerer confidence 2/5
perturbed volume


Explanation:
ld a vitafórumot

József Lázár
Hungary
Local time: 18:11
Native speaker of: Native in HungarianHungarian

Peer comments on this answer (and responses from the answerer)
neutral  Katalin Horváth McClure: Hát, én erre nem találtam a szövegkörnyezetbe illő használatot, csak olyat, amely valamilyen felzavart, felkavart térfogatot jelent, de itt nem erről van szó.
35 mins
Login to enter a peer comment (or grade)

15 hrs   confidence: Answerer confidence 3/5Answerer confidence 3/5
error volume, under fault volume


Explanation:
A vitafórumban írottakkal együtt úgy gondolom, hogy többféle fordítása lehet, attól függően, hogy azokat a bizonyos feltételeket, amelyek mellett ez a tároló (számláló) működik, hogyan nevezzük.
Ha "fault conditions", akkor "under fault volume" lehet a megoldás, ha "error conditions", akkor pedig "error volume" vagy esetleg "under error volume".

Az alább megadott három anyagban "error volume" a neve.
Az első amerikai:
"Display of currently measured values of flow rate, flow velocity, sound velocity, indication of system status, display of forward and reverse volume counters as well as forward and reverse error volume counters"
http://www.totalflowsupport.com/Manuals-PDF/Totalsonic softw...

A második német gyártó, ha jól látom:
"Reset Error Volume Counter"
http://80.72.135.115/flowsic600/documents/manuals/fr.downloa...

A harmadik ugyanaz a gyártó, de más dokumentum:
"While the system is in “Error” status, the volumes determined are stored in separate error volume counters. These counters can be reset. Such a reset is recorded in the Custody
logbook [1] together with date and time stamp.
#5011 “ForwardVolumeErr“
#5013 “ReverseVolumeErr“ ..."
http://www.automatyka-przemyslowa.pl/flowsic600/documents/ma...

Az "under faulr error" pedig itt található:

http://www.dresser.com/documents/RMI/imcw_user_trmnl_hndbk.p...
Lásd 51. oldal:
"9.1 Clear Occurred Faults
A fault is described as a measurement reading that exceeds its acceptable range. This may be caused, for example, by
exceeding the stated pressure range of the transducer. When a fault condition occurs, an intuitive indication is displayed on the LCD indicating the nature of the fault (see Table 6 (Fault Code Reference Table)).
...
9.2 Clear Uncorrected Volume Under Fault
In all fault conditions, the Uncorrected Under Fault volume register will be activated showing the total number of
accumulated uncorrected volume units during the period in which the fault was present. Only faults that affect the
correction factor will cause the Uncorrected Under Fault register to be activated. Under these conditions, both the
Uncorrected Volume and the Uncorrected Under Fault volume will continue to increment, however the Corrected
Volume register will no longer be activated (this register will be re-activated once the fault condition has been cleared)."

Katalin Horváth McClure
United States
Local time: 13:11
Native speaker of: Native in HungarianHungarian
PRO pts in category: 20
Login to enter a peer comment (or grade)



Login or register (free and only takes a few minutes) to participate in this question.

You will also have access to many other tools and opportunities designed for those who have language-related jobs (or are passionate about them). Participation is free and the site has a strict confidentiality policy.

KudoZ™ translation help

The KudoZ network provides a framework for translators and others to assist each other with translations or explanations of terms and short phrases.


See also:
Term search
  • All of ProZ.com
  • Term search
  • Jobs
  • Forums
  • Multiple search