The KudoZ open glossary is a browsable glossary of terms translated via the KudoZ term help network.

Japanese to English Mechanics / Mech Engineering Translation Glossary

Japanese term		English translation
$B%U%#%K%,!<%I(B		Finigard	Michael Fletcher
Entered by: Michael Fletcher
$BJdMQIJ(B		spare part(s)
1 トランススペース		transverse frame space
(電流の)オシロ分析		(current waveform) analysis by using oscilloscope
2度焼コンベア正転		2nd sintering
2値化の結果が１となった画素数がある大きさ以上の場合に		If the number of pixels with binarized value of 1 should exceed a preset number,
3段ブームからの４～６段ブームの取り外し		detach the 4th to 6th booms from the 3rd boom.
加工代、ざぐり代		processed part, a part to be cut for counter boring
加工面欠陥		Machined surface defects
加速側		somewhat faster than ...
基本終了		basic call end/basic end	cinefil
Entered by: cinefil
型検対応		type approved
偏心用エキセン軸		Eccentric Shaft
偏芯ピン		eccentric pin
つぶし率(O-ring)		squeeze rate	cinefil
Entered by: cinefil
とがり山		fundamental triangle	cinefil
Entered by: cinefil
ながらスイッチ		(On-site) Flexible Rod Switch
なじみ運転モード		break-in mode
はぐみ		mismatch/center shifting/gap/deviation
ばり		burr
またぎ歯厚, またぎ歯数		base tangent length (or span), number of teeth in the span	Katalin Horváth McClure
Entered by: Katalin Horváth McClure
こまわりファイバ		flexible fiber
さぐり→ざぐり (座ぐり）		spot face, spot facing (座ぐり加工), counterbore
かき上げ羽根		(upward) impeller/ agitator / stirrer
かませ物		spacer	Harry Oikawa
Entered by: Harry Oikawa
十字形の形の単一線で表示される		appears/displayed as a cross-shaped (single-) line
危険回転数の関係から最高速度が低下		the maximum speed decreases because of the critical speed of the ball screw
反射指向性		reflection directivity	cinefil
Entered by: cinefil
反湯口部		Opposite of Pouring gate area
台形ネジナット		trapezoidal thread nut	cinefil
Entered by: cinefil
台車		undercarriage
台車干渉ニゲ指示		stipulated clearance between bogie(and plate)	seika
Entered by: seika
取付け運転		mounting operation
吊り上げ代		hoisting clearance
同様なパネル形からその表面の形状が変わった		with shape of its surface slightly different from that of a 6-panel Brazuca having similar panel
堰部		weir
場合における		when	David Gibney
Entered by: David Gibney
塗装要		Coating Required
墨だし		Marking
増し締め		retighten / tighten / see http://www.proz.com/kudoz/japanese_to_english/mechanics_mech_engineering/3457829-増し締め.html?login=y&glo

• 1
• 2
• 3
• 4
• 5
• 6
• 7
• 8
• 9
• 10
• Next »

Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Next »